Full 1

DYNON SKYVIEW UPDATES

 

Configuration Files

Warning: The airplane pilot and owner are fully and solely responsible for choosing and considering the correct configuration file, applicable for the explicit aircraft. If there is any possible doubt, please check with your nearest authorized distributor or, if not available, Flight Design GmbH. Caution: The setting files offered below are only to be used for the software version they are designed for. The software version can be identified by the name of the setting file “SW X.Y….”, where “X.Y” is the software version. Upload of these files to any other software version may lead to major or significant rework at a DYNON facility. To download the SkyView configuration files relevant for your specific aircraft, please follow the links listed below. Select the correct configuration file using the link related to your specific aircraft model, and the relevant design specifics of your individual aircraft. Design specifics not identified here do not have an influence on the configuration file. Disclaimer: Dynon SkyView configuration files will only work for upgrades from the Flight Design 11.1 Version. If you have any other versions installed, please, contact Customer Care and give the information about your aircraft serial number and avionic hardware modifications since the delivery of the aircraft. The download files are compressed zip-files containing the following data:
  • EMS unit update file
  • PFD unit update file
  • The applicable Service Instruction for the update
  • Revision 4 of the Supplement S7 to the POH
The zip file can be extracted using any software capable to uncompress *.zip files, However, there is a selection of the most commonly used software below:

Rotax 912iS Fuel-Injected Engine

CTLS – MTOW 600kg (1320 Lbs.) Download Configuration Files: Dynon SkyView Update 15.3.3 Warning! This update is applicable only for:
  • CTLSi LSA MTOW 600 kg with Rotax 912iS fuel-injected engine!
Update possible from SW version 11.1 only!

Rotax Carburated Engine

CTLS – MTOW 600kg (1320 Lbs.) Download Configuration Files: Dynon SkyView Update 15.3.3 Warning! This update is applicable only for:
  • CTLS LSA MTOW 600 kg with carburated engine!
Update possible from SW version 11.1 only!